Which smart gates are suitable for your site?

Which smart gates are suitable for your site?

If a doorman is configured, Chuangxintong Technology recommends: three-roller turnstile, wing gate and swing gate, which can effectively enter and exit the channel by swiping cards or other identity recognition methods.

1. First of all, let's talk about the three-roller turnstile. The three-roller turnstile is mainly suitable for occasions with relatively large flow of people. The maximum channel width of the three-roller turnstile can reach 550mm, so the three-roller turnstile is only suitable for people, not for non-motor vehicles. The appearance of the three-roller turnstile is relatively monotonous, but its practicality can be said to be compared with the other two gate machines. The cost performance of the three-roller turnstile is the best. Of course, the wing gate and swing gate are also good.

2. Secondly, the wing gate is mainly used in some places with high requirements for appearance and some high-end occasions. The wing gate cannot be used alone. It must be composed of two or more wing gates. The maximum channel composed of two wing gates is 550mm. Generally, only people can pass through. If you want to pass a wheelchair or luggage, you can also use another extended telescopic soft wing gate. Like the subway wing gate, people can push wheelchairs and large luggage through. The wing gate is sought after by customers for its convenience and fashion. Its cost performance is relatively neutral among the three models, because its price is twice as high as that of the three-roller gate.

3. Swing gates are mainly used in some communities or factories for people and non-motor vehicles. The advantage of swing gates is that their passage width is relatively wide, up to 1800mm, which is very suitable for narrow places at the entrance of communities or factories. In order to save space and ensure traffic safety, one entrance is divided into motor vehicle passages and non-motor vehicle passages. Compared with three-roller gates and wing gates, you will feel that swing gates are the most suitable for communities or factories. However, due to the larger space of the swing arm, the swing gate is slower than the other two models when running, and the maintenance rate is higher than that of the three-roller gate and wing gate.

If there is no guard to monitor, communities, factories, construction sites and other high-security protection places, Chuangxintong Technology recommends the use of full-height revolving gates.

1. The biggest advantage of the full-height turnstile is that it can prevent people from jumping, climbing, escaping, and following. The maximum height of the full-height turnstile can reach 2600mm, and its maximum channel can reach 550mm. The height of the full-height turnstile is equivalent to the height of a wall, so the full-height turnstile will be a good choice when there is no guard or personnel guarding. The channel width of the full-height turnstile is 550mm, the same as the three-roller gate wing gate. The full-height turnstile can also achieve effective passage by swiping a card or fingerprint. 2. Secondly, there is a higher-end barrier gate, which is mainly an upgraded version of the wing gate and swing gate. It takes the advantages of the wing gate and swing gate. The barrier gate is mainly used in high-end office buildings or high-end entertainment venues. The barrier arm of the barrier gate can be raised to a maximum of 800mm, and the barrier sheet is transparent, which does not affect the effect that guests can visit the inside from the outside. Compared with the wing gate and swing gate, the biggest difference between the barrier gate and the swing gate is that people cannot climb to the other end. Its appearance effect is the most high-end one.