Like swing doors, wing doors are also a widely used access control system

The wing gate is an important member of the pedestrian door category. Like the swing gate, the wing gate is also a widely used access control system. The wing gate is usually used in residential areas, companies, scenic spots, office buildings, libraries, railway stations, subway stations and other places as access control equipment to verify the identity information of passers-by. Generally, closed management or charging places require wing gates to prevent outsiders from entering and exiting at will, or to ensure that people who have paid the fee can enter. The wing brake has many rich functional characteristics, which will be introduced one by one.

The gate of the wing gate is a fan-shaped sheet structure, which is opened and closed in a telescopic manner. When it is opened, the two doors are retracted into the door to release, and when it is closed, the two gates are stretched and clamped. The wing gate has the following functional characteristics:

1. The chassis of the wing gate is beautiful, generous, durable, waterproof, and anti-corrosion, and can be used in outdoor environments.

2. By pulling the code on the control panel, the operating status of the device can be programmed online, supporting self-flexible settings.

3. The access control card reader device is generally equipped with an integrated access control, which is convenient for wiring and use, simple, and can also be used for other reader device systems with strong compatibility.

4. The wing door has a humanized traffic indication function, which can show pedestrians the current traffic status of the device. Usually, the green light allows passage, the red light prohibits passage, and the blue light is in the standby state of the device.

5. The gate has an automatic reset function. When pedestrians pass through card swiping or face recognition verification, if they fail to pass within the set time, the gate will automatically close and need to be verified again to pass through the passing time to support self-setting.

6. The wing brake has rebound, infrared anti-pinch, anti-collision, and a variety of reliable safety protection measures such as anti-tailing when encountering resistance, while improving the safety of the site and the gate itself.

7. The gate has the function of automatically opening the door when the power is off to meet the requirements of the fire channel, and can automatically close the gate after power is turned on again, avoiding the situation where it cannot pass when there is no power.

8. The wing brake has an intrusion alarm function. When someone passes without effective verification, the infrared sensor on the brake will sense the intrusion of someone, and then the buzzer will sound a continuous alarm. The following alarm is also the same principle.

The above is an introduction to the functional characteristics of the wing brake, provided by Ankuai. Today's wing doors support multiple authentication methods. The current mainstream methods of opening the door are card swiping and face recognition, especially face recognition, which has been widely popularized. In addition to card swiping and face recognition, Ankuai wing doors can also support Bluetooth interconnection, ID card recognition and other methods, which greatly increases the flexibility of choice. Like revolving doors, wing doors are ubiquitous pedestrian gate equipment, and they will be used wherever access control systems are needed.